Product Catalogue | DEREMFIX – Mechanisms, Adhesives, Textiles

Zigzag Springs

DRM-ZGZG-SLNCK-1

The Zigzag Spring Swing Clip is an essential upholstery component used in seating systems. Instead of attaching the zigzag spring directly to the plastic spring clip, the spring is first connected to the swing clip, allowing controlled movement and improved suspension performance.

Cl17 Clips

DRM-CLPS-17

DRM-CLPS-17 (CL17 Clips) are professional upholstery fastening components designed to securely connect zigzag springs to paper covered wire using a pneumatic CL17 clip gun. This system allows all zigzag springs to operate as a synchronized suspension unit, moving simultaneously across the entire seating surface.

Paper Covered Wire

DRM-KGT-KTEL-01

DRM-KGT-KTEL-01 (Paper Covered Wire) is a high-performance upholstery component designed to be used together with DRM-CLPS-17 (CL17 Clips) and DRM-ZGZG-SLNCK-01 (Zigzag Spring Swing Clips). Installed using a pneumatic clip gun, this integrated system enables all zigzag springs to function as a synchronized suspension unit.

Headrest Mechanisms

DRM-EKO6-90/180

DRM-EKO6-90/180 (90°–180° Headrest Mechanism) is an ergonomic furniture mechanism designed to position the headrest securely at any desired angle between 90° and 180° in upholstered seating systems.

Zigzag Clip Guns · Zigzag Springs · Zigzag Spring Clips · Cl17 Clips

DRM-TBNC-KLPS-00

DRM-TBNC-KLPS-00 (Clip Gun Fastener) is a professional upholstery fastening component designed to be used together with DRM-ZGZG-SLNCK-01 (Zigzag Spring Swing Clip), DRM-KĞT-KTEL-01 (Paper Covered Wire) and DRM-CLPS-17 (CL17 Clips). Installed using a pneumatic clip gun, it ensures secure and accurate assembly of the complete zigzag spring suspension system.

Zigzag Spring Clips

DRM-PLST-KPL-CLIPS-25

DRM-PLST-KPL-CLIPS-25 (Plastic Spring Clip 25) is a durable fastening component designed to securely attach zigzag springs to the wooden frame of upholstered furniture. It ensures the correct positioning of the spring system, allowing the suspension to perform efficiently and consistently.

Connectors

DRM-ZMB-PCKT-SPRNG

DRM-ZMB-PCKT-SPRNG (Pocket Spring Staple Fastener) is a professional fastening component designed to securely attach pocket spring units to mattress frames. Applied using a pneumatic staple gun, it enables fast, accurate and reliable installation of pocket spring systems during mattress manufacturing.

End Caps & Furniture Glides

DRM-FXING-PLSTK-36

DRM-FXING-PLSTK-36 (Adjustable Plastic Profile Insert) is an innovative furniture component designed to be press-fitted into hollow metal profile legs according to specified technical dimensions. It is developed to compensate for uneven floor surfaces and provide maximum stability for furniture.

End Caps & Furniture Glides

DRM-OVAL-30/40

DRM-OVAL-30/40 (30×40 Oval Plastic Profile Insert) is a professional plastic end cap designed to fit 30×40 mm oval metal profile legs according to technical specifications. It is widely used in office furniture, workstations, conference tables, metal furniture and commercial interior applications, providing a clean appearance, durability and floor protection.

Screws, Nuts & Bolts

DRM-IMBUS-69

DRM-IMBUS-69 (Hex Socket Screw Cover Cap) is a decorative and protective plastic cap designed to conceal hex socket (Allen) screws according to the specified technical dimensions.

End Caps & Furniture Glides

DRM-KNT-TAPA-57

DRM-KNT-TAPA-57 (Profile Tube End Cap) is a protective plastic insert designed to fit metal profile tube legs according to technical specifications. It is primarily used in office furniture, workstations, conference tables and other furniture with metal legs to improve floor protection, reduce noise and enhance overall stability.

End Caps & Furniture Glides

DRM-MIL-88

DRM-MIL-88 (Plastic Pivot Pin) is a high-strength engineering plastic component designed for office chairs and office seating mechanisms according to the specified technical dimensions. It securely connects moving mechanism components, ensuring smooth operation, precise movement and long-term reliability.

Connectors

DRM-DMNT-PLSTK

DRM-DMNT-PLSTK (Knock-Down Plastic Connector) is a versatile plastic fastening component primarily designed to securely connect double bed bases. It provides quick assembly and disassembly, making it an ideal solution for modular furniture systems and efficient production processes.

Connectors

DRM-TMS-PLSTK

DRM-TMS-PLSTK (Knock-Down Plastic Connector) is a high-strength fastening component developed to securely connect bed bases, sofas, cabinets and modular furniture edge-to-edge. It enables quick assembly and disassembly, improving manufacturing efficiency while simplifying transportation and installation.

End Caps & Furniture Glides

DRM-PML-PLSTK-97

DRM-PML-PLSTK-97 (Plastic Pin Leg) is a durable furniture leg manufactured according to the specified technical dimensions, primarily designed for office chairs and occasionally used in single-seat lounge chairs. Its pin-fit mounting system enables fast, secure and efficient installation while simplifying furniture assembly.

Connectors

DRM-KLP-DUBEL-29

DRM-KLP-DOWEL-29 (Plastic Dowel Connector) is a concealed plastic fastening component designed for veneered and unfinished furniture panels, providing hidden assembly in sofas, seating systems and modular furniture where high structural strength is not required. It creates clean, invisible joints while preserving the furniture's aesthetic appearance and simplifying assembly.

Connectors

DRM-PLSTK-PUL

DRM-PLSTK-PUL (Plastic Backing Washer) is a complementary plastic fastening component used in tufting and tension band applications. Designed to work together with the plastic pins of single-sided and double-sided tension bands, it securely supports the pin inside the foam while helping prevent damage to the upholstery materials.

End Caps & Furniture Glides

DRM-MFSL-001

DRM-MFSL-001 (Articulated Furniture Glide) is an innovative furniture foot primarily designed for office chairs and office seating, while also being suitable for lounge chairs and upholstered seating. Its articulated design automatically adapts to minor floor irregularities, ensuring full surface contact and improved furniture stability.

End Caps & Furniture Glides

DRM-VDL-PLSTK-14/20

DRM-VDL-PLSTK-14/20 (Adjustable Threaded Furniture Glide) is an adjustable furniture foot designed primarily for office chairs, wooden chairs and similar furniture applications. Its threaded adjustment mechanism allows users to compensate for uneven floor surfaces, ensuring maximum stability and balanced support.

End Caps & Furniture Glides

DRM-BNG-VDL-01

DRM-BNG-VDL-01 (Threaded Leveling Foot) is an adjustable furniture foot designed to compensate for uneven floor surfaces in sofas, chairs and other seating furniture. It is installed into furniture equipped with a female threaded insert or T-nut, allowing precise height adjustment and reliable leveling.

End Caps & Furniture Glides

DRM-ACLI-20/40 PLSTK

DRM-ACLI-20/40 PLSTK (Angled Oval Profile End Cap) is a professional plastic insert designed for 20×40 mm oval metal profile legs. Primarily developed for the office furniture industry, it provides both an attractive finish and enhanced functionality.

End Caps & Furniture Glides

DRM-KNK-AYAK-26

DRM-KNK-AYAK-26 (Conical Plastic Profile Insert) is a professional plastic end cap manufactured according to the specified technical dimensions and available in three different sizes. Its conical design allows quick press-fit installation into metal profile tube legs, providing a secure and reliable fit.

End Caps & Furniture Glides

DRM-KNK-BOG

DRM-KNK-BOG (Conical Plastic Profile Insert) is a professional plastic end cap manufactured according to the specified technical dimensions and available in three different sizes. Its conical design allows quick press-fit installation into metal profile tube legs, providing a secure and reliable fit.

End Caps & Furniture Glides

DRM-DZB-TAPA-1

DRM-DZB-TAPA-1 (Flat Head Tube End Cap) is a professional plastic tube insert manufactured according to the specified technical dimensions and available in seven different diameter sizes. Its specially designed ribbed outer surface provides a secure press-fit into metal tubes and profile legs, ensuring reliable and long-lasting installation.

End Caps & Furniture Glides

DRM-DKDRTGN-PRFL

DRM-DKDRTGN-PRFL (Rectangular Profile End Cap) is a professional plastic profile insert manufactured according to the specified technical dimensions and designed to fit the most common rectangular metal tube profiles available on the market. Its press-fit design allows quick and secure installation inside rectangular profile tubes.

End Caps & Furniture Glides

DRM-KARE-PRFL-TAPA

DRM-KARE-PRFL-TAPA (Square Profile End Cap) is a professional plastic profile insert manufactured according to the specified technical dimensions and designed to fit the most common square metal tube profiles available on the market. Its press-fit design allows quick and secure installation inside square profile tubes.

End Caps & Furniture Glides

DRM-LMA-PRFL

DRM-LMA-PRFL is a professional plastic connector specifically designed for oval profile stem legs, manufactured according to the specified technical dimensions. Its integrated locking slots allow the insert to be securely press-fitted onto the profile stem, providing a stable and reliable connection.

Elastic Webbing

DRM-ELSTK-KLN-5/7 (Elastic Webbing)

DRM-ELSTK-KLN-5/7 (Elastic Webbing) is a premium upholstery elastic webbing designed for the seat and back support systems of sofas, armchairs and other upholstered furniture. Available in 50 mm and 70 mm widths, it is installed beneath the foam cushion to create a flexible support layer that enhances seating comfort and distributes weight evenly.

Elastic Webbing

DRM-KNC-01 (Elastic Webbing Hook)

DRM-KNC-01 (Elastic Webbing Hook) is a professional fastening component designed to securely install elastic webbing onto metal profile furniture frames. Unlike conventional stapled or nailed installations, the hook is fitted into a pre-drilled hole in the frame, providing a secure, durable and reliable mounting solution.

Bed Mechanisms

DRM-BZMKS-01 (Storage Bed Lifting Mechanism)

DRM-BZMKS-01 (Storage Bed Lifting Mechanism) is a professional lifting mechanism designed to provide smooth, balanced and controlled opening and closing of storage bed bases. It is engineered to operate with gas springs and is compatible with various gas spring force ratings (Newton values) depending on the weight and dimensions of the bed.

Gas Springs

DRM-AMRTSR-GAS (Gas Spring for Storage Bed Mechanisms)

DRM-AMRTSR-GAS (Gas Spring for Storage Bed Mechanisms) is a high-performance gas spring engineered to operate in synchronization with storage bed lifting mechanisms. It provides smooth, controlled and balanced opening and closing of the bed base, improving user comfort while ensuring reliable and efficient operation of the lifting system.

Bed Mechanisms

DRM-BZMKS-KLT (Locking Storage Bed Mechanism)

DRM-BZMKS-KLT (Locking Storage Bed Mechanism) is a professional lifting mechanism designed to provide smooth, balanced and controlled opening and closing of storage bed bases. Engineered to operate in synchronization with gas springs, it features an integrated safety locking system that offers additional protection beyond standard lifting mechanisms.

End Caps & Furniture Glides

DRM-KTABLA-01 (360° Swivel Chair Base)

DRM-KTABLA-01 (360° Swivel Chair Base) is a professional 360-degree swivel furniture base designed for lounge chairs, armchairs and premium seating systems. It provides smooth, quiet and effortless rotation, enhancing both user comfort and functionality.

End Caps & Furniture Glides

DRM-YLDZ-DNR-15 (5-Star Swivel Chair Base)

DRM-YLDZ-DNR-15 (5-Star Swivel Chair Base) is a professional 360° swivel furniture base designed for lounge chairs, armchairs and contemporary seating systems. Its elegant five-star design delivers a modern appearance while providing smooth, quiet and effortless rotation for enhanced user comfort.

Armchair & Seating Mechanisms

DRM-KÇMBR-60 (Concealed Swivel Mechanism)

DRM-KÇMBR-60 (Concealed Swivel Mechanism) is a professional 360° concealed swivel mechanism developed for lounge chairs, armchairs and contemporary seating furniture. Its centrally positioned square swivel plate provides smooth, quiet and balanced rotation while remaining completely hidden beneath the chair, preserving the furniture's clean and elegant appearance.

End Caps & Furniture Glides

DRM-PRFL-SLNDR-60 (Profile Cylinder Furniture Leg)

DRM-PRFL-SLNDR-60 (Profile Cylinder Furniture Leg) is a decorative metal furniture leg designed for sofas, seating sets and contemporary upholstered furniture. Its cylindrical profile design enhances the visual appeal of modern furniture while providing exceptional strength, stability and long-lasting durability.

End Caps & Furniture Glides

DER-PRFL-KARE-60 (Square Profile Furniture Leg)

DER-PRFL-KARE-60 (Square Profile Furniture Leg) is a decorative metal furniture leg designed for sofas, seating sets and contemporary upholstered furniture. Its square profile design creates a clean, modern and architectural appearance while providing exceptional strength, stability and long-lasting durability.

Recliner Mechanisms · Motorized Mechanisms

DRM-OMJ56-WM (Motorized Recliner Chair Mechanism)

DRM-OMJ56-WM (Motorized Recliner Chair Mechanism) is a professional motion mechanism designed for premium recliner chairs and lounge seating. It combines 360° swivel, rocking and motorized reclining functions in a single system, delivering exceptional comfort, ergonomic support and effortless operation.

Recliner Mechanisms

DRM-OMJ56-M (Manual Recliner Chair Mechanism)

DRM-OMJ56-M (Manual Recliner Chair Mechanism) is a professional motion mechanism developed for premium recliner chairs and lounge seating. It combines 360° swivel, rocking, and manual reclining operated by a release lever into a single system, providing outstanding comfort, ergonomic support and reliable performance.

End Caps & Furniture Glides

DRM-MTLAYK-26 (Furniture Leg)

DRM-MTLAYK-26 (Furniture Leg) is a decorative furniture leg designed for sofas, seating sets and contemporary upholstered furniture. With a 160 mm (16 cm) height, it provides sufficient floor clearance for robot vacuum cleaners while adding a clean, modern and elegant appearance to furniture.

End Caps & Furniture Glides

DRM-MTLAYK-DSTK16 (160 mm Furniture Leg)

DRM-MTLAYK-DSTK16 (160 mm Furniture Leg) is a decorative furniture leg designed for sofas, seating sets and contemporary upholstered furniture. Thanks to its concealed mounting interface, the fixing point remains hidden beneath the furniture, creating a clean, modern and elegant appearance while the leg itself remains visible.

End Caps & Furniture Glides

DEM-PLSTK-FXNG-16 (Adjustable Furniture Leg – 160 mm)

DEM-PLSTK-FXNG-16 (Adjustable Furniture Leg – 160 mm) is a professional furniture leg designed for sofas, seating sets and contemporary upholstered furniture. It provides a fixed height of 160 mm (16 cm) and features an adjustable plastic leveling foot at the bottom, allowing approximately 10 mm (1 cm) of height adjustment.

Tv Lift Mechanisms · Motorized Mechanisms

DRM-TVLFT-YTKALTI (Under-Bed TV Lift System)

DRM-TVLFT-YTKALTI (Under-Bed TV Lift System) is one of DEREMFIX's signature innovations, designed to keep televisions completely concealed beneath the bed when not in use. Using a motorized lifting mechanism, the television rises smoothly and quietly from a hidden compartment beneath the bed into the viewing position, then retracts back into storage after use.

Armchair & Seating Mechanisms · Recliner Mechanisms

DRM-BRCLN-LUX

DRM-BRCLN-LUX is an innovative backrest mechanism developed for two-seat and three-seat sofas. Mounted inside the rear section of the backrest, the mechanism allows the backrest to rotate completely backward, increasing the seating depth by approximately 200 mm (20 cm) and creating a larger, more comfortable seating area.

Armchair & Seating Mechanisms · Recliner Mechanisms

DRM-BRCLN-ECO

DRM-BRCLN-ECO has been developed as a cost-efficient alternative to the DRM-BRCLN-LUX mechanism while delivering the same functionality and user experience. Designed for two-seat and three-seat sofas, it allows the backrest to rotate completely backward, increasing the seating depth by approximately 200 mm (20 cm) to create a larger and more comfortable seating area.

Armchair & Seating Mechanisms · Recliner Mechanisms

DRM-OMJ46-MN (Manual Recliner Mechanism)

DRM-OMJ46-MN (Manual Recliner Mechanism) is a professional reclining mechanism designed for recliner chairs, TV chairs and relaxation seating. Featuring a manual release lever actuator, the footrest can be easily extended, and once opened, the user simply pushes the backrest to achieve a nearly fully flat reclining position for maximum comfort.

Armchair & Seating Mechanisms · Recliner Mechanisms · Motorized Mechanisms

DRM-6114YA-ZEROWM (Single-Motor Zero Wall Recliner Mechanism)

DRM-6114YA-ZEROWM (Single-Motor Zero Wall Recliner Mechanism) is a professional powered reclining mechanism developed for recliner chairs, sectional sofas and contemporary seating systems. A single electric actuator synchronously operates both the backrest and footrest, providing smooth, effortless reclining and outstanding ergonomic comfort.

Armchair & Seating Mechanisms · Motorized Mechanisms

DRM-396ALCK-AYKWM (Low-Leg Compatible Zero Wall Recliner Mechanism)

DRM-396ALCK-AYKWM (Low-Leg Compatible Zero Wall Recliner Mechanism) is a professional powered recliner mechanism designed for recliner chairs, lounge chairs, sectional sofas and contemporary seating systems. A single electric actuator synchronously operates the backrest and footrest, delivering smooth movement and outstanding ergonomic comfort.

Armchair & Seating Mechanisms · Motorized Mechanisms · Recliner Mechanisms

DRM-LIFTONE-WM (Power Lift Recliner Mechanism)

DRM-LIFTONE-WM (Power Lift Recliner Mechanism) is an innovative power lift recliner mechanism developed specifically for users with limited mobility. Using a single electric actuator, it performs both the synchronized reclining function and the power lift assistance, helping users transition safely from a seated position to standing.

Armchair & Seating Mechanisms · Motorized Mechanisms · Recliner Mechanisms

DRM-LIFTTWO-WM (Dual-Motor Power Lift Recliner Mechanism)

DRM-LIFTTWO-WM (Dual-Motor Power Lift Recliner Mechanism) is an innovative power lift recliner mechanism specifically developed for users with limited mobility. Equipped with two independent electric actuators, it allows the reclining functions and the lift-assist function to be controlled separately, providing maximum comfort and highly personalized seating positions.

Backrest Mechanisms · Headrest Mechanisms · Armrest Hinges

DRM-BOM-IYN-300 (300 mm Bi-Directional Headrest & Armrest Mechanism)

DRM-BOM-IYN-300 (300 mm Bi-Directional Headrest & Armrest Mechanism) is an innovative adjustment mechanism that stands out within the BOM series thanks to its bi-directional movement system. The two key features that distinguish this model from other BOM mechanisms are its compact 300 mm size and its ability to operate smoothly in both directions.

Backrest Mechanisms · Armrest Hinges

DRM-240x180-D (Dismountable Dual-Bracket Sliding Backrest Mechanism)

DRM-240x180-D (Dismountable Dual-Bracket Sliding Backrest Mechanism) is a patented professional mechanism developed for adjustable backrest systems used in sofas and upholstered seating. Unlike conventional sliding backrest mechanisms that move in a single action, this advanced system features a 10-position indexed adjustment, allowing the backrest to move forward gradually, increasing the seating depth and creating a larger seating area.

Backrest Mechanisms · Armrest Hinges

DRM-240x180-M (Manual Dual-Bracket Sliding Backrest Mechanism)

DRM-240x180-M (Manual Dual-Bracket Sliding Backrest Mechanism) is a patented professional mechanism developed for adjustable backrest systems used in sofas and upholstered seating. Unlike conventional sliding backrest mechanisms that move in a single action, this advanced system features a 10-position indexed adjustment, allowing the backrest to move forward gradually, increasing the seating depth and providing a wider seating area.

Backrest Mechanisms · Armrest Hinges

DRM-SK 210x280-D (Dismounted Multi-Position Sliding Backrest Mechanism)

DRM-SK 210x280-D (Dismounted Multi-Position Sliding Backrest Mechanism) is a patented professional mechanism developed for adjustable backrest systems used in sofas and upholstered seating. Unlike conventional sliding backrest mechanisms that move in a single action, this advanced design features a 10-position indexed adjustment, allowing the backrest to recline gradually while increasing the seating depth in a smooth and controlled manner.

Backrest Mechanisms · Armrest Hinges

DRM-SK 210x280-M (Manual Multi-Position Sliding Backrest Mechanism)

DRM-SK 210x280-M (Manual Multi-Position Sliding Backrest Mechanism) is a patented professional mechanism developed for adjustable backrest systems used in sofas and upholstered seating. Unlike conventional sliding backrest mechanisms that move in a single motion, this advanced system features a 10-position indexed adjustment, allowing the backrest to recline gradually while increasing the seating depth in a smooth and controlled manner.

Backrest Mechanisms · Armrest Hinges

DRM-SK 175x240 (Riveted Backrest & Armrest Motion Mechanism)

DRM-SK 175x240 (Riveted Backrest & Armrest Motion Mechanism) is the upgraded professional version of the widely recognized L24 backrest and armrest mechanism. Unlike conventional models that use bolted and nut-fastened joints, this mechanism features a riveted construction, providing greater durability, improved structural integrity and maintenance-free operation.

Armrest Hinges

DRM-BL-90 (4-Position Adjustable Headrest Mechanism)

DRM-BL-90 (4-Position Adjustable Headrest Mechanism) is a professional adjustment mechanism developed for adjustable headrests used in sofas, lounge furniture and upholstered seating systems. The mechanism moves smoothly from a 90° starting position to a fully extended 180° resting position, providing ergonomic head support and enhanced seating comfort.

Armrest Hinges

DRM-12-90 (12-Position Adjustable Headrest Mechanism)

DRM-12-90 (12-Position Adjustable Headrest Mechanism) is a professional adjustment mechanism developed for adjustable headrests used in sofas, lounge chairs and upholstered seating systems. The mechanism moves smoothly from a 90° starting position to a fully extended 180° resting position, providing a wide range of ergonomic adjustment.

Backrest Mechanisms · Headrest Mechanisms · Armrest Hinges

DRM-BOM-390-D (390 mm Adjustable Headrest & Armrest Mechanism)

DRM-BOM-390-D (390 mm Adjustable Headrest & Armrest Mechanism) is a professional adjustment mechanism designed for adjustable headrests and armrests used in sofas, lounge furniture and upholstered seating systems. Featuring a 390 mm operating range and a concave motion geometry, it delivers smooth movement, ergonomic positioning and outstanding user comfort.

Backrest Mechanisms · Headrest Mechanisms · Armrest Hinges

DRM-BOM-620-D (620 mm Adjustable Headrest & Armrest Mechanism)

DRM-BOM-620-D (620 mm Adjustable Headrest & Armrest Mechanism) is a professional adjustment mechanism designed for adjustable headrests and armrests used in sofas, lounge furniture and upholstered seating systems. Featuring a 620 mm operating range and a concave motion geometry, it provides smooth movement, extended adjustment capability and excellent ergonomic comfort.

Headrest Mechanisms · Armrest Hinges · Backrest Mechanisms

DRM-BOM-440-B (440 mm Reinforced Headrest & Armrest Mechanism)

DRM-BOM-440-B (440 mm Reinforced Headrest & Armrest Mechanism) is a professional adjustment mechanism designed for adjustable armrests and headrest cushions used in sofas, lounge furniture and upholstered seating systems. Featuring a 440 mm operating range and a concave motion geometry, it delivers smooth movement, ergonomic positioning and exceptional user comfort.

Backrest Mechanisms · Headrest Mechanisms · Armrest Hinges

DRM-D-PP (Bracket-Free Headrest & Armrest Mechanism)

DRM-D-PP (Bracket-Free Headrest & Armrest Mechanism) is a professional adjustment mechanism offering the same technical specifications, operating principle and functionality as the DRM-BOM-360 mechanism. It provides smooth, ergonomic and reliable movement for adjustable armrests and headrests used in modern upholstered furniture.

Backrest Mechanisms · Headrest Mechanisms · Armrest Hinges

DRM-BOM-360 (360 mm Adjustable Headrest & Armrest Mechanism)

DRM-BOM-360 (360 mm Adjustable Headrest & Armrest Mechanism) is a professional adjustment mechanism designed for armrests and, more commonly, adjustable headrest cushions used in sofas, lounge furniture and upholstered seating systems. Featuring a 360 mm operating range and a concave movement geometry, it delivers smooth motion, excellent ergonomics and enhanced seating comfort.

Headrest Mechanisms · Armrest Hinges

DRM-KK 115-D (90°–195° Adjustable Armrest & Headrest Mechanism)

DRM-KK 115-D (90°–195° Adjustable Armrest & Headrest Mechanism) is a professional adjustment mechanism designed for fully upholstered armrests and upholstered headrests. It shares the same operating principle as the DRM-KK 75-D and DRM-KK 90-D models, with one key difference: it provides an extended adjustment range of up to 195°, offering greater flexibility and enhanced functionality.

Headrest Mechanisms · Armrest Hinges

DRM-KK 90-D (90°–180° Adjustable Armrest & Headrest Mechanism)

DRM-KK 90-D (90°–180° Adjustable Armrest & Headrest Mechanism) is a professional adjustment mechanism designed for fully upholstered armrests and upholstered headrests. The mechanism provides smooth and controlled movement from a 90° starting position to a fully extended 180° horizontal position, adding innovative functionality and enhanced ergonomics to upholstered furniture.

Headrest Mechanisms · Armrest Hinges

DRM-KK 75-D (Adjustable Armrest & Headrest Ratchet Mechanism)

DRM-KK 75-D (Adjustable Armrest & Headrest Ratchet Mechanism) is a professional adjustment mechanism designed for fully upholstered armrests and upholstered headrests. The mechanism operates from the bottom upward, allowing users to position the armrest or headrest at multiple comfortable angles.

Armrest Hinges

DRM-KK 75/90-MB (Adjustable Folding Armrest Mechanism)

DRM-KK 75/90-MB (Adjustable Folding Armrest Mechanism) is a professional armrest adjustment mechanism developed for movable upholstered furniture requiring high strength and durability. Although mechanisms of this type are commonly used in adjustable headrests, this model has been specifically engineered for folding armrest applications, providing reliable long-term performance under repeated use.

Headrest Mechanisms · Armrest Hinges

DRM-KK 75-T (Reverse Motion Folding Armrest Mechanism)

DRM-KK 75-T (Reverse Motion Folding Armrest Mechanism) is an innovative adjustment mechanism primarily designed for fully upholstered armrests and, less frequently, for fully upholstered adjustable headrests. Unlike conventional folding mechanisms, this model operates using a reverse movement principle, providing greater flexibility for innovative furniture designs.

Backrest Mechanisms · Armrest Hinges

DRM-MG-KS (Heavy-Duty Recliner Reinforcement Mechanism)

DRM-MG-KS (Heavy-Duty Recliner Reinforcement Mechanism) is a professional reinforcement system developed to enhance the structural strength of recliner mechanisms during both backrest and footrest reclining positions. Designed for demanding applications, it delivers exceptional durability and long-term reliability under high load conditions.

Tv Lift Mechanisms

DRM-SWR-1 (360° Swivel & Rocking Chair Mechanism)

DRM-SWR-1 (360° Swivel & Rocking Chair Mechanism) is an innovative motion mechanism developed for armchairs and accent chairs. It combines 360-degree swivel and forward-backward rocking functions in a single system, delivering outstanding comfort, flexibility and an enhanced seating experience.

Backrest Mechanisms

DRM-KC-1 (Fold-Down Armrest Mechanism)

DRM-KC-1 (Fold-Down Armrest Mechanism) is an innovative armrest mechanism designed for two-seat and three-seat sofas. Installed inside the sofa arm, the mechanism allows the armrest to rotate 180° into a horizontal position, extending the usable seating or lounging surface by approximately 250 mm (25 cm) on each side.

Armrest Hinges

DRM-KDM (Seat Rotation Conversion Mechanism)

DRM-KDM (Seat Rotation Conversion Mechanism) is an innovative transformation mechanism designed for sectional sofas, modular seating systems and selected two-seat relaxation sofas. When the seat cushion is pulled forward, the mechanism performs a 90° rotation, transforming the seating configuration into a different functional position.

Solvent Based Upholstery Adhesives

Catalogue

Ready to start your next project?